Replacement
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
|
3. |
Disconnect the 6P connector (B) of the coil antenna and then remove
the coil antenna (A) after loosening the screw.
|
4. |
Installation is the reverse of removal procedure.
|
Installation
1.
Install the head lamp assembly after connecting the connector.
2.
Install the front bumper.
3.
Connect the n ...
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check valve f ...
Coolant. Repair procedures
Refilling And Bleeding
Never remove the radiator cap when the engine is
hot. Serious scalding could be caused by hot fluid und ...