Hyundai Accent Manuals

Hyundai Accent: Front seat - Seats - Safety features of your vehicleHyundai Accent: Front seat

Manual adjustment

Manual adjustment

Forward and rearward

To move the seat forward or rearward:
1. Pull the seat slide adjustment lever up and hold it.
2. Slide the seat to the position you desire.
3. Release the lever and make sure the seat is locked in place.

Adjust the seat before driving, and make sure the seat is locked securely by trying to move forward and rearward without using the lever. If the seat moves, it is not locked properly.

Seatback angle

Seatback angle

To recline the seatback:

1. Lean forward slightly and lift up the seatback recline lever.
2. Carefully lean back on the seat and adjust the seatback of the seat to the position you desire.
3. Release the lever and make sure the seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.)

Seat cushion height (for driver’s seat) (if equipped)

Seat cushion height (for driver’s seat) (if equipped)

To change the height of the seat cushion, push the lever upwards or downwards.

Armrest (for driver’s seat) (if equipped)

Armrest (for driver’s seat) (if equipped)

To use the armrest, swing down the armrest to the lowest position.

Headrest

Headrest

The driver's and front passenger's seats are equipped with a headrest for the occupant's safety and comfort.

The headrest not only provides comfort for the driver and front passenger, but also helps to protect the head and neck in the event of a collision.

WARNING

Adjusting the height up and down

Adjusting the height up and down

To raise the headrest, pull it up to the desired position (1). To lower the headrest, push and hold the release button (2) on the headrest support and lower the headrest to the desired position (3).

Removal

Removal

To remove the headrest, raise it as far as it can go then press the release button (1) while pulling upward (2).

To reinstall the headrest, put the headrest poles (3) into the holes while pressing the release button (1). Then adjust it to the appropriate height.

WARNING

Make sure the headrest locks in position after adjusting it to properly protect the occupants.

Active headrest (if equipped)

Active headrest (if equipped)

The active headrest is designed to move forward and upward during a rear impact. This helps to prevent the driver's and front passenger’s head from moving rearward and thus helps prevent neck injuries.

WARNING

A gap between the seat and the headrest release button may appear when seating on the seat or when you push or pull the seat. Be careful not to get your finger, etc. caught in the gap.

Seat warmer (if equipped)

Seat warmer (if equipped)

The seat warmer is provided to warm the front seats during cold weather.With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passenger's seat.

During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position.

With the seat warmer switch in the ON position, the heating system in the NOTICE

With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature.

CAUTION

WARNING - Seat warmer burns

Passengers should use extreme caution when using seat warmers due to the possibility of excess heating or burns. The occupants must be able to feel if the seat is becoming too warm and to turn the seat warmer off. The seat warmer may cause burns even at low temperatures, especially if used for long periods of time. In particular, the driver must exercise extreme care for the following types of passengers:

1. Infants, children, elderly or disabled persons, or hospital outpatients
2. Persons with sensitive skin or those that burn easily
3. Fatigued individuals
4. Intoxicated individuals
5. Individuals taking medication that can cause drowsiness or sleepiness (sleeping pills, cold tablets, etc.)

Seatback pocket (if equipped)

Seatback pocket (if equipped)

The seatback pocket is provided on the back of the front passenger’s and driver’s seatbacks.

Do not put heavy or sharp objects in the seatback pockets. In an accident WARNING - Seatback pockets

Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose from the pocket and injure vehicle occupants.

For proper operation of the occupant detection system: WARNING

For proper operation of the occupant detection system:

Seats
Driver’s seat (1) Forward and backward (2) Seatback angle (3) Seat cushion height (4) Seat warmer* (5) Headrest (6) Armrest* Front passenger’s seat (7) Forward and backward (8) Seatback ...

Rear seat
Headrest The rear seat(s) is equipped with headrests in all the seating positions for the occupant's safety and comfort. The headrest not only provides comfort for passengers, but also helps ...

See also:

Disassembly
Identify MLA(Mechanical lash adjuster), valves, valve springs as they are removed so that each item can be reinstalled in ...

Instrument Cluster. Components and Components Location
Components ...

Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com