Hyundai Accent: Side Impact Sensor (SIS). Description and Operation

The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (SIS) is to provide an indication of a collision. The Side Impact Sensor (SIS) sends acceleration data to the SRSCM.

Installation

• Do not turn the ignition switch ON and do not contact the battery cable while replacing the ...

Side Impact Sensor (SIS). Components and Components Location

Components ...

See also:

Inspection
Rotor 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the s ...

Installation
Installation is in the reverse order of removal. Perform the following : • Adjust a shift cable. • Refill engine with engine oil. ...

Removable towing hook
1. Open the trunk lid/tailgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the lower part of the cover on the bumper. 3. Install the towing hook by turning it ...