Hyundai Accent: Body Control Module (BCM). Repair procedures

Function

Door Lock / Unlock Control Control the following function as Door Lock/Unlock Control by Relay control. • IGN Key reminder • Crash Door U ...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

See also:

Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Wiper Switch Washer Switch ...

Circuit Diagram
(M/T) (A/T) ...

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel an ...