CAUTION
To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window.
NOTICE
If you want to defrost and defog the front windshield, refer to “Windshield defrosting and defogging” in this section.
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...
Installation
1.
Install the interior junction box.
2.
Install the crash pad lower panel.
3.
Check that all system operates n ...
Inspection
1.
Check the coil spring for crack and deformation.
2.
Check the coil spring pad for damage and deformation.
...