Hyundai Accent: Engine And Transaxle Assembly

Special Service Tools

Special Service Tools Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09455-21200) Ins ...

Engine Mounting. Components and Components Location

Components 1. Transaxle mounting bracket 2. Rear roll stopper 3. Engine mounting bracket 4. Engine mounting support bracket ...

See also:

Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement. ...

Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector ...