Hyundai Accent: Fluid. Repair procedures

Fluid. Components and Components Location

Components Location 1. Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...

Service Adjustment Procedure

Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, ...

See also:

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Use approved window washer anti-freeze in system
To keep the water in the window washer system from freezing, add an approved window washer anti-freeze solution in accordance with instructions on the container. Window washer anti-freeze is avail ...

Inspection
1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. 2. Check the bearing for damage, abnorma ...