Hyundai Accent: Fuel filler lid

Closing the hood

1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...

Opening the fuel filler lid

The fuel filler lid must be opened from inside the vehicle by pulling the fuel filler lid opener switch. NOTICE If the fuel filler lid will not open because ice has formed around it, tap ligh ...

See also:

Use high quality ethylene glycol coolant
Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling syst ...

Components Operations
PCM (Power Train Control Module) 1. The PCM (ECM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transp ...

Replacement
[Disc Type] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and ...