Hyundai Accent: Inhibitor Switch. Repair procedures

Inhibitor Switch. Schematic Diagrams

Circuit Diagram ...

Removal

1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position. 2. Rem ...

See also:

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the roa ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...