Hyundai Accent: Input/Output Specification

Circuit Diagram

...

Instrument Cluster. Description and Operation

Description Function Tail lamp warning buzzer - This function dose not operate if the vehicle equipped BCM. - With the tail lamp sw ...

See also:

Installation
1. Install the hazard lamp switch. 2. Connect the connectors. 3. Install the center fascia garnish. ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Ve ...

Repair procedures
Inspection Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure th ...