Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / CVVT Oil Control Valve (OCV). Repair procedures / Inspection

1.	Turn the ignition switch OFF.

2.	Disconnect the OCV connector.

3.	Measure resistance between the OCV terminals 1 and 2.

4.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

CVVT Oil Control Valve (OCV). Repair procedures

...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the CVVT oil control valve connector (A). ...

See also:

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

Adjustment
Clutch Release Cylinder Air Bleeding Procedure Use the specified fluid. Avoid mixing different brands of fluid ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com