Hyundai Accent: Inspection
| 1. |
Check the components for damage or deformation.
|
| 2. |
Compress and extend the piston and check that there is no abnormal
resistance or unusual sound during operation.
|
Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Rear Coil Spring. Components and
Components Location
Components
1. Spring upper pad
2. Spring
3. Spring lower pad
...
See also:
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and
various engine speed.
...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description and Operation
Description
Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the overdrive ...
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures.
If in doubt, we strongly recomme ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com