Hyundai Accent: Intake Air Temperature
Sensor (IATS). Description and Operation
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature
Sensor (IATS). Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold
Absolute Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the temperature.
So the ECM uses not only MAPS signal but also IATS signal. This sensor has a
Negative Temperature Coefficient (NTC) Thermister and it's resistance changes
in reverse proportion to the temperature.
Installation
•
Install the component with the specified
torques.
•
...
Intake Air Temperature
Sensor (IATS). Specifications
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
...
See also:
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
...
Accelerator Position Sensor
(APS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the ...
Installation
1.
Install the DRL unit.
2.
Install the glove box.
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com