Hyundai Accent Manuals

Hyundai Accent: Intake Air Temperature 
Sensor (IATS). Schematic Diagrams - Engine Control System - Engine Control/Fuel System - Hyundai Accent 2010-2019 Service ManualHyundai Accent: Intake Air Temperature Sensor (IATS). Schematic Diagrams

Circuit Diagram

(M/T)

(A/T)


Intake Air Temperature Sensor (IATS). Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 ~ 48.35 -20 ...

Intake Air Temperature Sensor (IATS). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between th ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety location. 2.Connect connection hose (9) of the compressor directly to the tire valve. 3.Plug the compressor power c ...

In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

Categories

Hyundai Accent Manuals

© 2011-2019 Copyright www.hamanual.com