Hyundai Accent: Removal| 1. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
| 2. |
Remove the front speaker (A) after loosening 3 screws.
|
| 1. |
Remove the rear door trim panel.
(Refer to the BD group - "Rear door")
|
| 2. |
Remove the rear speaker (A) after removing 3 screws.
|
| 1. |
Remove the front door delta cover (A).
|
| 2. |
Remove the tweeter speaker (A) after disconnecting the connector
and loosening 2 screws.
|
Inspection
InstallationInspection
1.
Check the hands free remote control switch for resistance between
No.4 and No.5 terminals in each switch position.
[Audio + Bluetooth Hands Free]
...
Inspection
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the map lamp switch.
...
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side ...