Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
|
| 3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 4. |
Remove 2 screws on the steering wheel.
|
| 5. |
Remove the steering wheel cover (A) after loosening 4 screws.
|
| 6. |
Remove the hands free switch.
|
Inspection
1.
Check the hands free remote control switch for resistance between
No.4 and No.5 terminals in each switch position.
[Audio + Bluetooth Hands Free]
...
Installation
1.
Reassemble the hands free switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reasse ...
See also:
Installation
When replacing the ECM, the vehicle equipped with
the immobilizer must be performed procedure as below.
[In the ...
Inspection
1.
Check that the light operate according to the following timing
chart.
2.
If the daytime running light is not operated well, insp ...
ETC (Electronic Throttle
Control) System. Troubleshooting
Fail-Safe Mode
Item
Fail-Safe
ETC Motor
Throttle valve stuck at 7°
TPS
TPS 1 fault
ECM looks at TPS2
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com