Hyundai Accent: Seat Belt Pretensioner (BPT). Repair procedures

Seat Belt Pretensioner (BPT). Components and Components Location

Components ...

Removal

1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the lower anchor bolt. ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV termina ...

Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important senso ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...