Hyundai Accent: Side Body A ( 4Door )
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Side Body. Body Repair / Side Body A ( 4Door )
|
|
|
|
|
Front side member tooling hole (Ø12) |
Fender apron upper reinforcement tooling hole (Ø7) |
Front door upper hinge mounting hole (Ø13) |
|
|
|
|
|
Front door lower hinge mounting hole (Ø13) |
Rear door upper hinge mounting hole (Ø13) |
Rear door lower hinge mounting hole (Ø13) |
|
|
|
|
|
Rear door switch mounting hole (Ø9) |
Quarter fixed garnish mounting hole (Ø7) |
Rear combination lamp housing mounting hole (Ø6) |
|
|
|
|
|
Rear bumper mounting hole (8.5X8.5) |
|
|
Side Body B ( 4Door )
Side outer panel notch
Side outer panel notch
Side outer panel notch
...
See also:
Inspection
1.
Disconnect the ignition switch connector (B) and key switch connector
(A) from under the steering column.
2.
Check for continui ...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is fo ...
35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation
Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com