Hyundai Accent: Side Impact Sensor (SIS). Description and Operation

The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (SIS) is to provide an indication of a collision. The Side Impact Sensor (SIS) sends acceleration data to the SRSCM.

Installation

• Do not turn the ignition switch ON and do not contact the battery cable while replacing the ...

Side Impact Sensor (SIS). Components and Components Location

Components ...

See also:

Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be he ...

Satellite radio reception
You may experience problems in receiving XMâ„¢ satellite radio signals in the following situations. If you are driving in a tunnel or a covered parking area. If you are driving beneath the t ...

Installation
1. Install the heater & air conditioning controller. 2. Install the audio unit. 3. Connect the battery (-) ...