Hyundai Accent: Special Service Tools
Special Tools
|
Tool (Number and name) |
Illustration |
Use |
|
09861-31100 Sealant cut-out tool |
|
Cutting windshield sealant (Use with 09861-31200) |
|
09861-31200 Sealant cutting blade |
|
Cutting windshield sealant (Use with 09861-31100) |
|
09861-31000 Windshield molding remover |
|
Windshield molding removal |
|
09880-4F000 Hog ring clip installer |
|
Hog ring clip Installation |
Tightening Torque
Items
N.m
Kgf.m
lb-ft
Front and rear doors
Door hinge to body
33.3 ~ 41.2
3.4 ~ 4.2
24.6 ~ 30.4 ...
Troubleshooting
Troubleshooting
Symptom
Suspect Area
Remedy
Water leaks from sunroof
Dirt accumulated in drain tube
Clear dirt inside of drain
...
See also:
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine
coolant, then install it on a pressure tester.
2.
Ap ...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...
Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque c ...
Hyundai Accent Manuals
