Hyundai Accent: Specifications
Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Multifunction switch / Specifications
Specifications
|
Items |
Specifications |
|
|
Rated voltage |
DC 12V |
|
|
Operating temperature range |
-30°C ~ +80°C (-22 ~ +176°F) |
|
|
Rated load |
Dimmer and passing switch |
High : 120 W (Lamp load) Low : 110 W (Lamp load) Passing : 66 W (Lamp load) |
|
Lighting switch |
21 W (Lamp load) |
|
|
Turn signal & lane change switch |
69 W (Lamp load) |
|
|
Front fog lamp switch |
200 mA (Relay load) |
|
|
Wiper & mist switch |
Mist, Low, High : 5 A (Motor load) Intermittent : 0.22 ± 0.05 A (Relay load) Lock : 25 A (Motor load) |
|
|
Washer switch |
5 A (Motor load) |
|
|
Variable intermittent volume switch |
Max. 25 mA |
|
|
Rear wiper switch |
IG 2 : 3.5 A (Motor load) Lock : 14 A (Motor load) |
|
See also:
Crankshaft Position Sensor
(CKPS). Description and Operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft
position and is one of the most important sensors of the engine control system.
If there is no CKPS signal input, the eng ...
Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Consumer information
This consumer information has been prepared in accordance with regulations issued
by the National Highway Traffic Safety Administration of the U.S. Department of
Transportation. Your Hyundai deale ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com