Hyundai Accent Manuals

Hyundai Accent: SS-B Solenoid Valve(ON/OFF). Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Accent: SS-B Solenoid Valve(ON/OFF). Specifications

Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10 ~ 11


SS-B Solenoid Valve(ON/OFF). Description and Operation
Description SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

SS-B Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram ...

See also:

Removal
1. Disconnect the negative (-) battery terminal. 2. Loosen 2 screws holding the overhead console (A). 3. ...

If engine turns over normally but does not start
1. Check fuel level. 2. With the ignition switch in the LOCK position, check all connectors at ignition coils and spark plugs. Reconnect any that may be disconnected or loose. 3. If the engine sti ...

Fuel Pressure Control Valve. Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Hyundai Accent Manuals

В© 2011-2026 Copyright www.hamanual.com