Hyundai Accent: Starter. Components and Components
Location
Components
|
1. Screw 2. Front bracket 3. Stop ring 4. Stopper 5. Overrun clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch |
10. Armature 11. Yoke assembly 12. Brush (-) 13. Brush holder 14. Brush (+) 15. Rear bracket 16. Through bolts 17. Screw |
Repair procedures
Troubleshooting
Starter Circuit
The battery must be in good condition and fully charged.
1.
...
See also:
Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The sensing
element (Semiconductor element) built ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the underdrive ...
Removal
1.
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
2.
Remove the glove box housing.
...
Hyundai Accent Manuals
