Hyundai Accent Manuals

Hyundai Accent: Steering wheel audio control - Audio system - Features of your vehicle - Hyundai Accent 2010-2019 Owners ManualHyundai Accent: Steering wheel audio control

The steering wheel audio control button is installed to promote safe driving.

The steering wheel audio control button is installed to promote safe driving.

Do not operate audio remote control buttons simultaneously. CAUTION

Do not operate audio remote control buttons simultaneously.

VOLUME (VOL +/-) (1)

MUTE (2)

MODE (3)

Press the MODE button to select Radio, CD (Compact Disc).

SEEK/PRESET (If the SEEK/PRESET button is pressed for 0.8 second or more, it will work as) (4)

If the SEEK/PRESET button is pressed for 0.8 second or more, it will work as follows in each mode.

RADIO mode

It will function as the AUTO SEEK select button. It will SEEK until you release the button.

CDP mode

It will function as the FF/REW button.

CDC mode

It will function as the DISC UP/DOWN button.

If the SEEK/PRESET button is pressed for less than 0.8 second, it will work as follows in each mode.

RADIO mode

It will function as the PRESET STATION select buttons.

CDP mode

It will function as the TRACK UP/DOWN button.

CDC mode

It will function as the TRACK UP/DOWN button.

Detailed information for audio control buttons is included in the following pages in this section.

Antenna
Roof antenna Your car uses a roof antenna to receive both AM and FM broadcast signals. This antenna is a removable type. To remove the antenna, turn it counterclockwise. To install the antenna, ...

How vehicle audio works
FM radio reception AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then receive ...

See also:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Ve ...

Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Categories

Hyundai Accent Manuals

© 2011-2019 Copyright www.hamanual.com