Hyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Fourth generation RB (2010–present) / Hyundai Accent 2010-2019 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Fourth generation RB (2010–present) / Hyundai Accent 2010-2019 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque converter.
Installation
1.
Installation is the reverse of removal.
•
...
Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
...
See also:
Specifications
Transaxle type
M6CF1
Engine type
Gasoline 1.6 GDI
Gear ratio
1st
3.769
2nd
2.045
...
Installation
1.
Installation is the reverse of removal.
•
...
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the seat belt after pushing ...
Categories
Hyundai Accent Manuals
© 2011-2019 Copyright www.hamanual.com