Hyundai Accent: Accelerator Position Sensor
(APS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Accelerator Position Sensor
(APS). Specifications
Specification
|
Accelerator Position |
Output Voltage (V) |
|
|
APS1 |
APS2 |
|
|
C.T |
0.7 ~ 0.8 |
0.275 ~ 0.475 |
|
W.O.T |
3.8 ~ 4.4 |
1.75 ~ 2.35 |
Accelerator Position Sensor
(APS). Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator
pedal module and detects the rotation angle of the accelerator pedal. The APS
is one of the most important senso ...
Accelerator Position Sensor
(APS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
See also:
Adjustment
Adjusting the control cable
1.
Set room side AT lever(shift lever) and automatic transaxle side
manual control lever to "N" position.
2. ...
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake perf ...
Don't let your parking brake freeze
Under some conditions your parking brake can freeze in the engaged position.
This is most likely to happen when there is an accumulation of snow or ice around
or near the rear brakes or if the bra ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com