Hyundai Accent: Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat back assembly.
(Refer to the Body group - "Seat")
|
Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
See also:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A) after disconnecting the trip
switch connector(B).
...
Fuel requirements
Your new vehicle is designed to use only unleaded fuel having a pump octane number
((R+M)/2) of 87 (Research Octane Number 91) or higher.
Your new vehicle is designed to obtain maximum performance ...
Fender. Repair procedures
Replacement
•
When removing and installing the fender, an assistant
is necessary.
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com