Hyundai Accent: Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the seat belt after pushing the lock pin (A).
|
| 3. |
Remove the following parts. (Refer to the Body group-Interior
trim)
|
| 4. |
Disconnect the anchor pretensioner connector (A).
|
| 5. |
Loosen the anchor pretensioner mounting bolt (B) and remove the
anchor pretensioner.
|
Installation
1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least three minutes.
...
See also:
Installation
1.
Connect the audio unit connectors and cable.
2.
Install the audio unit.
3.
Install the crash pad center fas ...
Adjustment
Adjusting the control cable
1.
Set room side AT lever(shift lever) and automatic transaxle side
manual control lever to "N" position.
2. ...
To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine
into the key opening. If a lock is covered with ice, squirt it with an approved
de-icing fluid to remove the ice. If ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com