1. |
Installation is the reverse of removal.
|
2. |
Use a SST (09580-0U000) when installing the brake caliper assembly.
|
3. |
After installation, bleed the brake system. (Refer to Brake system
bleeding)
|
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Ve ...
Air cleaner
Filter replacement
It must be replaced when necessary, and should not be cleaned and reused.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST : For a single wiping cycle, push the lever upward and release it with the
lever in the OFF position. The wipers will operate continu ...