Hyundai Accent: Interior B ( 4Door )
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Interior. Body Repair / Interior B ( 4Door )
|
|
|
|
|
Seatbelt height adjust upper mounting hole (Ø15) |
Seatbelt height adjust lower mounting hole (Ø15) |
Front seatbelt retractor mounting hole (Ø12) |
|
|
|
|
|
Rear door checker mounting hole (Ø13) |
Quarter inner panel tooling hole (Ø8.5) |
Quarter inner panel tooling hole (Ø18) |
|
|
|
|
|
Wheel house inner trim mounting hole (Ø10) |
Rear door striker mounting hole (Ø13) |
|
Interior A ( 4Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
Interior C ( 4Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
See also:
Vehicle stability management (VSM)
This system provides further enhancements to vehicle stability and steering responses
when a vehicle is driving on a slippery road or for vehicle detected changes in
coefficient of friction betwee ...
Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500
miles (12,000 km) or sooner if irregular wear develops.
During rotation, check the tires for correct balance.
When r ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts. The purpose of the pre-tensioner is to make sure that the seat belts fit
tightly against the occupa ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com