WARNING
Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death.
Whenever the battery terminals or related fuses are disconnected, you must reset the time.
When the ignition switch is in the ACC or ON position, the clock buttons operate as follows:
Setup the clock
With audio off
1. Press the [SETUP] button until the clock of the display blinks.
2. Set the clock by turning the knob(1) and press it.
With audio on
1. Press the [SETUP] button.
2. Select the [CLOCK] mode by turning the knob(1) and press it.
3. Set the clock by turning the knob(1) and press it.
Camshaft Position Sensor
(CMPS). Troubleshooting
Wave Form
...
Installation
Installation is in the reverse order of removal.
Perform the following :
•
Adjust a shift cable.
•
Refill engine with engine oil.
...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram
...