Hyundai Accent Manuals

Hyundai Accent: Seat Heater. Repair procedures - Seat Electrical - Body Electrical SystemHyundai Accent: Seat Heater. Repair procedures

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Seat Electrical / Seat Heater. Repair procedures

Inspection

Driver seat and Passenger seat
1.
Check for continuity and measure the resistance between terminals.
[Cushion]

PIN
No.
 Description
 PIN
No.
 Description
3
 Heater (+)
 5
 NTC -
4
 NTC +
 6
 GND

Average Max. temperature
- Cushion : HIGH : 42 ± 2°C / LOW : 39 ± 2°C
- Back : HIGH : 52 ± 2°C / LOW : 46 ± 2°C
2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value (Fabric / Leather)
- Cushion : 1.54Ω ± 10%
- Back : 1.23Ω ± 10%
- Set : 2.77Ω ± 10%

Seat Heater. Components and Components Location
Components ...

Seat Heater Switch. Schematic Diagrams
Schematic Diagram ...

See also:

Replacement
Hood Assembly Replacement • When removing and installing the hood, an assistant is neces ...

Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gentl ...

Installation
• Do not turn the ignition switch ON and do not contact the battery cable while replacing the ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com