Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch. Repair procedures / Installation

1.	Install the power window switch module.

2.

Install the door trim panel after reconnecting the relevant connectors

-	Make sure that the power window switch module connectors are plugged properly.

-	Check that the power window switch and door lock switch operate normally.

Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

Power Door Mirrors

...

See also:

Components and Components Location
Component Location 1. Trunk lid actuator & switch 2. Rear door switch 3. Body control module 4. Key warning switch 5. Front door switch 6. Front door loc ...

Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter, it may overheat and create a fire hazard. To prevent this ...

Installation
1. Install the DRL unit. 2. Install the glove box. ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com