Hyundai Accent: Installation| 1. |
Install the washer reservoir.
|
| 2. |
Install the washer motor.
|
| 3. |
Install the washer hose.
|
| 4. |
Connect the washer motor connector.
|
| 5. |
Install the front bumper.
|
| 6. |
Check the washer motor operation.
|
RemovalRepair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Tr ...
Removal
PODS-F ECU
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front pa ...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn si ...