Hyundai Accent: Removal
Head Lamp
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front bumper.
(Refer to the BD group - "Front bumper")
|
| 3. |
Loosening the head lamp mounting bolts (4EA) and disconnect the
head lamp connector(B). Then, remove the head lamp assembly (A).
|
| 4. |
Remove the dust cap(A) and disconnect the connector. Then remove
the head lamp (high / low) bulb(B).
|
| 5. |
Disconnect the connector(A) and remove the turn signal lamp.
|
Installation
1.
Install the head lamp assembly after connecting the connector.
2.
Install the front bumper.
3.
Connect the n ...
See also:
Fuel Pressure Control Valve. Troubleshooting
Signal Waveform
...
Cylinder Block. Components and
Components Location
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing cap
...
SRS Control Module (SRSCM). Description and
Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint system deployment
and an event that d ...
Hyundai Accent Manuals
- Hyundai Accent 2017-2022 Service Manual
- Hyundai Accent 2010-2025 Owners Manual
- Hyundai Accent 2010-2025 Service Manual
В© 2011-2025 Copyright www.hamanual.com