Hyundai Accent: Installation
| 1. |
Install the head lamp assembly after connecting the connector.
|
| 2. |
Install the front bumper.
|
| 3. |
Connect the negative (-) battery terminal.
|
Removal
Head Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to the BD group - "Front bumper ...
Adjustment
Head Lamp Aiming Instructions
The head lamps should be aimed with the proper beam-setting equipment,
and in accordance with the equipment manufacturer's instructions.
...
See also:
Airbag Module Disposal. Description
and Operation
Airbag Disposal
Special tool required
Deployment tool 0957A-34100A
Before scrapping any airbags or side airbags (including those in a whole
vehicle to be scrapped), the airbag ...
Removal
1.
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
2.
Remove the rear sea ...
Muffler. Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
:
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4 ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com