Hyundai Accent Manuals

Hyundai Accent: Removal - Turn Signal Lamp. Repair procedures - Lighting System - Body Electrical SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp. Repair procedures / Removal

Door Mirror Turn Signal Lamp
1.
Remove the mirror (A) from the mirror holder. Be careful not to damage to the clip.
2.
Remove the mirror cover (A).
3.
Disconnect the mirror connector (A). Remove the door mirror turn signal lamp (B) after loosening screw.

Turn Signal Lamp. Repair procedures
...

Installation
Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

See also:

Installation
Be sure to install the harness wires not to be pinched or interfered with other parts. ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Components and Components Location
Components Location 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Canister close valve (CCV) 6. Fuel ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com