Hyundai Accent: Repair procedures

Ignition Switch Assembly

...

Inspection

1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...

See also:

To cancel cruise control, do one of the following
Press the brake pedal. Press the clutch pedal with a manual transaxle. Shift the shift lever into N (Neutral) with an automatic transaxle Press the CANCEL switch located on the steering whe ...

Inspection
Horn Inspection Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal. 1 : 12V Ground(-) 2 : 12V (+) ...

Installation
• Install the component with the specified torques. • ...