1. Open the trunk lid/tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install the cover after use.
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
Front Bumper. Components and Components
Location
Components
1. Front bumper cover
2. Radiator grill upper cover
3. Front bumper side bracket [ LH]
4. Front bumper side bracket [RH]
...
Inspection
1.
Check the audio remote control switch (A) for resistance between
terminals in each switch position.
Switch
C ...