Hyundai Accent Manuals

Hyundai Accent: Muffler. Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Accent: Muffler. Repair procedures

Removal and Installation

1.
Disconnect the battery negative terminal.

Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)

2.
Disconnect the rear oxygen sensor connector (A).

3.
Remove the front muffler (A).

Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

4.
Remove the catalytic converter & center muffler assembly (A).

Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

5.
Remove the main muffler (A).

6.
Installation is the reverse order of removal.
When installing, replace with new gaskets.
Muffler. Components and Components Location
Components 1. Front muffler 2. Catalytic converter & center muffler assembly 3. Main muffler 4. Gasket 5. Hanger ...

Engine Electrical System
...

See also:

Change to "winter weight" oil if necessary
In some climates it is recommended that a lower viscosity "winter weight" oil be used during cold weather. See section 8 for recommendations. If you aren't sure what weight oil you s ...

Rear combination light bulb replacement (5 Door)
(1) Tail light (2) Rear turn signal light (3) Back-up light (4) Stop and tail light (5) Side marker 1. Open the tailgate. 2. Loosen the light assembly retaining screws with a cross-tip screw ...

Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...

Hyundai Accent Manuals

В© 2011-2026 Copyright www.hamanual.com