Hyundai Accent: Manifold Absolute Pressure
Sensor (MAPS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Manifold Absolute Pressure
Sensor (MAPS). Specifications
Specification
|
Pressure [kPa (kgf/cm², psi)] |
Output Voltage (V) |
|
20.0 (0.20, 2.9) |
0.79 |
|
46.7 (0.47, 6.77) |
1.84 |
|
101.3 (1.03, 14.7) |
4.0 |
Manifold Absolute Pressure
Sensor (MAPS). Description and Operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density
type sensor and is installed on the surge tank. It senses absolute pressure
of the surge tank and transfers the analog ...
Manifold Absolute Pressure
Sensor (MAPS). Troubleshooting
Signal Waveform
...
See also:
Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from
the threaded side to check that the plunger movement.
...
Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch ...
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com