Items |
Specified lubricants |
Quantity |
Input shaft spline |
CASMOLY L9508 |
0.2g |
clutch release cylinder assembly |
Brake fluid DOT 3 or DOT |
As required |
Clutch pedal shaft and bushings |
Chassis grease SAE J310a, NLGI No.1 |
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Thermostat. Components and Components
Location
Components
1. Water inlet fitting
2. Thermostat
3. Heater pipe
4. Bypass hose
5. Water temp control assembly
6. Water temperature sensor
7. Gasket
...
Input Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8)
0.0472 ...