Hyundai Accent: Inspection| 1. |
Disconnect the back up lamp switch connector (A).
|
| 2. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
| 3. |
If necessary, repair or replace the backup lamp switch.
|
ReplacementVehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Lift the vehicle.
3.
D ...
Roof Trim. Repair procedures
Replacement
Sunvisor Replacement
•
When prying with a flat-tip screwdriver, wrap it with
...