Hyundai Accent: Replacement

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Rear Suspension System / Rear Coil Spring. Repair procedures / Replacement

1.

Remove the rear wheel & tire.

Tightening torque :

88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the rear wheel & tire.

2.

Remove the rear shock absorber (A) from the frame by loosening the bolt.

Tightening torque :

98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

3.	Installation is the reverse of removal.

Rear Coil Spring. Repair procedures

...

Inspection

1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

See also:

Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. WARNING A wheel that is not the correct si ...

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel an ...

Purge Control Solenoid Valve (PCSV). Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com