Hyundai Accent: Side Airbag (SAB) Module. Description
and Operation
Hyundai Accent RB (2010-2018) Service Manual / Restraint (Depowered) / Airbag Module / Side Airbag (SAB) Module. Description
and Operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least three minutes befo ...
Side Airbag (SAB) Module. Components
and Components Location
Components
...
See also:
Seat Belt Pretensioner (BPT). Components and Components Location
Components
...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description and Operation
Description
Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the overdrive ...
Accelerator Position Sensor
(APS). Specifications
Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.275 ~ 0.475
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com