Hyundai Accent: Removal| 1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
| 2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
| 3. |
Disconnect the curtain airbag harness connector.
|
| 4. |
After loosening the mounting bolts remove the curtain airbag.
|
InstallationVehicle stability management (VSM)
This system provides further enhancements to vehicle stability and steering responses
when a vehicle is driving on a slippery road or for vehicle detected changes in
coefficient of friction betwee ...
Check battery and cables
Winter puts additional burdens on the battery system. Visually inspect the battery
and cables as described in section 7. The level of charge in your battery can be
checked by an authorized HYUNDAI ...
Thermostat. Components and Components
Location
Components
1. Water inlet fitting
2. Thermostat
3. Heater pipe
4. Bypass hose
5. Water temp control assembly
6. Water temperature sensor
7. Gasket
...