Hyundai Accent: Brake/clutch fluid
Changing the coolant
Checking the brake/clutch fluid levelInstallation
1.
Dowel pin of crankshaft should be positioned at 3°
in relation to vertical center line.
2.
Align the TDC marks (A) of the CVVT ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
eng ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the rear seat (Refer to "Seat" in BD gro ...