Hyundai Accent: Camshaft Position Sensor (CMPS). Description and Operation

Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.

It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect.

The CMPS is installed on engine head cover and uses a target wheel installed on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.

Installation

• Install the component with the specified torques. • ...

Camshaft Position Sensor (CMPS). Troubleshooting

Wave Form ...

See also:

Adjustment
Clutch Release Cylinder Air Bleeding Procedure Use the specified fluid. Avoid mixing different brands of fluid ...

Troubleshooting
Troubleshooting Symptom Suspected area Repairment Pressing power switch does not turn on system Radio receiver power source circuit ...

Water pump. Troubleshooting
Troubleshooting Water Pump Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole ...