Hyundai Accent: Emission Control System

Starter Relay. Repair procedures

Inspection 1. Remove the fuse box cover. 2. Remove the starter relay(A). 3. Using an ohmmeter, check t ...

General Information

...

See also:

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Crash Pad. Components and Components Location
Components 1. Main crash pad assembly 2. Side airvent duct [RH] 3. Side airvent duct [LH] 4. Cluster assembly 5. Cluster facia panel 6. Heater control unit 7. ...

Cowl Top Cover. Repair procedures
Replacement 1. Remove the wiper arm cap (B) and remove the nuts, then remove wiper arm (A). Tighening torque : 22.6 ~ 26.5 Nm (2.3 ~ ...