Hyundai Accent Manuals

Hyundai Accent: Front Impact Sensor (FIS). Description and 
Operation - SRSCM - Restraint (Depowered)Hyundai Accent: Front Impact Sensor (FIS). Description and Operation

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Depowered) / SRSCM / Front Impact Sensor (FIS). Description and Operation

Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant Coding” procedure. 1. On ...

Front Impact Sensor (FIS). Components and Components Location
Components ...

See also:

Tire pressure monitoring system (TPMS)
(1) Low tire pressure telltale / TPMS malfunction indicator Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by ...

Room Lamp. Repair procedures
Inspection Room Lamp 1. Check that the switch operates properly after disconnecting the room lamp connector (A). ...

Components and Components Location
Components Location 1. Sub frame 2. Drive shaft 3. Lower arm 4. Strut assembly 5. Steering gearbox 6. Stabilizer bar ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com